New Presssure Washer Pump Maintenance

Have you recently purchased a new Pressure Washer or Replacement pump?

If you would like to extend the life of your pump, routine tune-ups can be essential to maintaining a good operating machine.  We are a repair center as well as a retail center. We offer our customers cheap maintenance packages. If you are a DIY person be sure to find out some basic information about your pump or pressure washer before doing the tune-up yourself. Our suggestions are basic recommendations for the pumps that we sell online. Always refer to your product's manual and follow manufacturer's instructions. 

PUMP Oil Basics:

We do not recommend for our customers to change the pump oil in the axial pump that we sell online. It comes pre-filled with a synthetic oil that is good for the life of the pump. 

See our 3000 PSI Axial Pressure Washer Pump by clicking on the image below:

For the majority of our contractor/commercial grade pumps, we recommend changing the pump oil after approximately the first 10 hours of use. Then, the oil only needs to be changed approximately every 200-300 hours. We recommend using a 30 Weight Non-Detergent Oil. Again, please check your manual. Below is our most common 3/4" Horizontal Shaft pressure washer pump:

http://www.thepumpoutlet.com/mi-t-m-3000-psi-triplex-crankshaft-driven-washer-pump-3-4-horizontal-shaft/

Comment or call is if you have any questions about pump/ pressure washer maintenance

877-PUMP444

877-786-7444

Featured Product: 8012PRO-35 HG 8 Gallon Per Minute 3500 PSI Hot Water Pressure Washer

8012PRO-35HG

This unit made by Pressure-Pro has become one of our most popular hot water units. It is skid mount and ready to be bolted onto a trailer or in the bed of a truck. At 8 Gallons Per minute, you can do some serious washing! If you wash driveways as an added bonus onto your washing gigs, this unit has no problem powering a Whisper Wash Big Guy Surface Cleaner with a 4 Tip Spray Bar. We have seen this in action and you are able to clean a concrete driveway as quickly as you can walk and move the hose. We have mounted many of these units onto our customized pressure washer trailer set-ups. We typically put this unit on a 14' Steel Trailer along with a 525 Gallon LEG tank with hose reels. 

We do offer quantity discounts on units as well as discounts for local pick-up customers.

Check out some of our recent customized units on our facebook page:https://www.facebook.com/northgeorgiaairless/Our username is @northgeorgiaairless
We do sell this skid unit online. Check it out at:
http://www.thepumpoutlet.com/copy-of-pressure-pro-8012pro-30hg-8-gpm-3000-psi-hot-water-pressure-washer/
We are a Retail, Repair & Rental center located in Gainesville, GA
Our store hours are Monday-Friday 7:30 a.m.-4:30 p.m. EST
Call us at : 877-PUMP444 877-786-7444 If you get us after hours, you can send a TEXT message :)
Or email us at sales@thepumpoutlet.com

Graco 390 PC Stand 17C310 Airless Paint Sprayer Parts & Review

We are an Authorized Distributor & Repair Center.

Selling the Graco brand is great because the products are tried and tested and our customers are satisfied with their purchase.

The 390 PC Stand is a great electric compact sprayer is designed for entry level contractor work. 

If you have any questions about its' uses and applications, please contact us. Our certified technicians can help you find the paint sprayer that will work best with the type of material you plan on spraying. 

If you have a machine that you have been using for a while and need replacement parts, let us help. We stock most major parts for this paint sprayer in our store in Gainesville, GA. 

Click on any of the links below to be taken to the product page on our website.

We are open from Monday-Friday 7:30-4:30 EST. 770-532-4442

If you need to contact us after our business hours you may email us: jconner@airlessoutlet.com

We have many more parts available. Check back for updates soon!

Part Description	Part Number
Graco 390 PC, Stand	17C310
Endurance Now Pro Connect Pump Kit	17C487
Express Pump ProConnect Kit	17J552
Prime Valve	235014
Pressure Switch/Potentiometer	24X289
60 Mesh Manifold Filter	246384
Manifold Filter O-Ring	117828

Paint Sprayer Repair in North Georgia (Gainesville, GA)

Looking for Paint Sprayer Repair in North Georgia?

We've got you covered! Our repair technicians have over a decade of experience. Our technicians have been certified to repair Graco, Airlessco, Titan and Speeflo Airless Paint Sprayers. We are an Authorized Warranty Repair center for those brands as well. If your repair is eligible for warranty work then we can file the claim for you. Whether you need a tune up, packings, new filters, or a major repair we can help you out.  We keep parts in stock for most major models.  

We do sell paint sprayers as well with very competitive pricing. If you buy your equipment from us, you get to join our Discount Club program. Our Discount Club provides you with $15 off every hour of repair labor, discounts on paint sprayer rental and 5% off all regularly priced parts and accessories. PLUS, get expedited repairs. If you buy it from us, you will receive faster & cheaper service for that machine. When you're a loyal customer, we are dedicated to remaining loyal to you by offering the best possible prices and service.  If you didn't buy your machine from us, we still offer faster service and cheaper parts than our local competitors. 

Come give us a try. We want to be your local Airless Paint Sprayer dealer & repair center. 

Check out our website for directions and store hours:

www.NorthGeorgiaAirless.com

Open Monday-Friday 7:30 a.m.-4:30 p.m.

770-532-4442

General Pump Sandblast Kit

Available online at www.thepumpoutlet.com

Mi-T-M 3-0414 Previously 3-0297 3000 PSI 3/4" Horizontal Shaft Pump Replaces CAT General AR

Mi-T-M 3000 PSI TRIPLEX Crankshaft Driven Washer Pump 3/4" HORIZONTAL SHAFT

This is a great replacement pump for your worn out pump. This unit IS designed for daily use and it is perfect for contractors.

 This pump is capable of producing up to 3000PSI at 2.5 GPM. I personally own a unit with this pump on it and have used it for almost 4 years with NO problems. This is a top quality replacement that will rival any pump on the market.

 The pump includes a built in unloader, a thermal relief valve, and a chemical injector.

 This pump is completly rebuildable from the valves to the packings and unloader.

 It is already pre-filled with oil.

 Replacement Requirements:

 Shaft Size: Fits most HORIZONTAL SHAFT engines with a 3/4" Diameter Shaft. The shaft should be approximately 2 inches long.

 Motor: Fits Engines Below 7 HorsepowerBolt Pattern: 4 Bolt Pattern where each hole is approximately 2 1/2" apart

It Will NOT Work for:

 - DOES NOT FIT 1" HORIZONTAL SHAFT. See our listing for an AR RRV4G40

 -DOES NOT FIT shaft shorter than 2 inches long or 7/8" HORIZONTAL SHAFT

 **If you have an Excell Pressure Washer with Plastic Shroud please be sure to check your crankshaft before ordering

Motor Size: DOES NOT FIT ABOVE 7 Horsepower motors. If your motor is more than 7 Horsepower see our listing for AR RRV4G40 (Pumps 7 HP & above will need a 1" shaft pump)

Replacement Parts:(Click on Each Part number to be taken to a link to the part on our website.

Entire Pump: 3-0414

Packing Kit: 70-0501

Valves:70-0502

Unloader: 8-0632

Chemical Injector:70-0499

Piston Rod: 46-1504

Contact us by emailing jconner@airlessoutlet.com or calling 770-532-4442.Feel free to call 770-532-4442 with any questions